Bathroom Remodel Cost Calculator
Estimate the cost of a bathroom remodel from the floor area and the level of work, from a simple refresh to a full upscale renovation.
Add to favorites
Estimated cost
$18,000 – $33,000
Typical figure around $25,500.
- Bathroom area
- 60 sq ft
- Wall tile (est.)
- ~96 sq ft
- Floor tile (est.)
- ~66 sq ft
- Typical duration
- 2–4 weeks
Labor and materials. Moving plumbing or adding a curbless shower pushes the job toward the upper end of the range.
Planning estimate only — confirm quantities with your supplier or contractor before ordering.
How this estimate is calculated
The estimate is built from bathroom floor area (sq ft) and scope, then priced at national average rates. It reports bathroom area, wall tile (est.), floor tile (est.) and typical duration, with quantities rounded up so you are never short of material and the standard waste allowance already included where it applies.
Labor and materials. Moving plumbing or adding a curbless shower pushes the job toward the upper end of the range.
The dollar range is a national average, so treat it as a starting point rather than a bid. Labor rates, permit fees and material delivery differ by region — the state table below shows how your state compares, and construction cost by state breaks the picture down further.
Prefer the longer version? Read our guide to How much does a bathroom remodel cost and How much does it cost to replace a water heater and Renovation vs remodel: what the difference costs you and Should you add a whole-house water filter during a remodel and 10 remodeling mistakes that make a house harder to sell and Which remodeling projects return the most at resale.
Cost by scope
Each row prices the same default job shown in the calculator above, changing only the scope. Use it to see what the upgrade or the cheaper option really costs before you commit.
| Scope | Low | High |
|---|---|---|
| Refresh (fixtures, paint, tile) | $9,000 | $18,000 |
| Mid-range remodel (vanity, tub, tile) | $18,000 | $33,000 |
| Upscale (walk-in shower, custom tile) | $33,000 | $60,000 |
What the same job costs by state
Every row applies that state's construction cost index to the national range calculated above. The index bundles local labor rates, permit fees and material delivery, so it is a planning figure rather than a bid.
| State | Index | Low | High |
|---|---|---|---|
| Ohio | 0.92 | $16,560 | $30,360 |
| Texas | 0.93 | $16,740 | $30,690 |
| North Carolina | 0.94 | $16,920 | $31,020 |
| Georgia | 0.95 | $17,100 | $31,350 |
| Arizona | 1.01 | $18,180 | $33,330 |
| Florida | 1.02 | $18,360 | $33,660 |
| Pennsylvania | 1.03 | $18,540 | $33,990 |
| Illinois | 1.05 | $18,900 | $34,650 |
| Colorado | 1.08 | $19,440 | $35,640 |
| Washington | 1.15 | $20,700 | $37,950 |
| California | 1.32 | $23,760 | $43,560 |
| New York | 1.42 | $25,560 | $46,860 |
Index 1.00 is the national average. See construction cost by state for metro-level figures and the projects homeowners ask about most.
Where to buy materials
Links to suppliers are sponsored: if you buy through them, we may earn a commission at no extra cost to you. It never affects an estimate.
- Search The Home Depot“bathroom vanity and shower valve”
- Search Lowe's“bathroom vanity and shower valve”
Frequently asked questions
How much does it cost to remodel a bathroom?
A typical mid-range bathroom remodel runs about $300 to $550 per square foot, which puts a 60 square foot bathroom near $18,000 to $33,000. A cosmetic refresh costs far less.
What pushes a bathroom remodel over budget?
Moving the toilet, tub or sink, discovering water damage behind the tile, and upgrading to a curbless walk-in shower. Each of those adds both labor and permit costs.
How much does a small bathroom remodel cost?
A 40 sq ft bathroom lands near $12,000 to $22,000 at mid-range scope, or $6,000 to $12,000 for a refresh. Cost per square foot rises as the room shrinks, because a vanity, toilet and shower are fixed costs that do not scale with the floor.
Do I need a permit for a bathroom remodel?
A permit is normally required whenever plumbing, electrical or ventilation is altered or added, and the work has to be inspected. Replacing a vanity, toilet or tub in the same position often needs none, but confirm with the local building department first.
Does this cost change from state to state?
Yes. Applying each state's construction cost index to the national range of $18,000 to $33,000, the same job runs from about $16,560 to $30,360 in Ohio (index 0.92) to $25,560 to $46,860 in New York (index 1.42).
What is not included in this estimate?
Labor and materials. Moving plumbing or adding a curbless shower pushes the job toward the upper end of the range. The figure is a national planning average for the work described above, not a contractor's quote.
