Pool Fence Calculator
Enter the run of fence and the number of gates to get the panel count and an installed range for glass, aluminum or mesh.
Add to favorites
Estimated cost
$11,200 – $19,200
Typical figure around $15,200.
- Fence run
- 100 linear ft
- Panels at 5 ft
- 20 panels
- Gates
- 1 gate
Installed prices including posts, anchors and a self-closing, self-latching gate. Glass prices assume tempered panels and a drilled deck or concrete footing.
Planning estimate only — confirm quantities with your supplier or contractor before ordering.
How this estimate is calculated
The estimate is built from fence run (ft), fence type and gates (gates), then priced at national average rates. It reports fence run, panels at 5 ft and gates, with quantities rounded up so you are never short of material and the standard waste allowance already included where it applies.
Installed prices including posts, anchors and a self-closing, self-latching gate. Glass prices assume tempered panels and a drilled deck or concrete footing.
The dollar range is a national average, so treat it as a starting point rather than a bid. Labor rates, permit fees and material delivery differ by region — the state table below shows how your state compares, and construction cost by state breaks the picture down further.
Prefer the longer version? Read our guide to How much does a pool fence cost.
Cost by fence type
Each row prices the same default job shown in the calculator above, changing only the fence type. Use it to see what the upgrade or the cheaper option really costs before you commit.
| Fence type | Low | High |
|---|---|---|
| Frameless glass | $11,200 | $19,200 |
| Semi-frameless glass | $7,900 | $13,600 |
| Aluminum | $3,300 | $6,650 |
| Mesh safety fence | $2,250 | $3,950 |
What the same job costs by state
Every row applies that state's construction cost index to the national range calculated above. The index bundles local labor rates, permit fees and material delivery, so it is a planning figure rather than a bid.
| State | Index | Low | High |
|---|---|---|---|
| Ohio | 0.92 | $10,304 | $17,664 |
| Texas | 0.93 | $10,416 | $17,856 |
| North Carolina | 0.94 | $10,528 | $18,048 |
| Georgia | 0.95 | $10,640 | $18,240 |
| Arizona | 1.01 | $11,312 | $19,392 |
| Florida | 1.02 | $11,424 | $19,584 |
| Pennsylvania | 1.03 | $11,536 | $19,776 |
| Illinois | 1.05 | $11,760 | $20,160 |
| Colorado | 1.08 | $12,096 | $20,736 |
| Washington | 1.15 | $12,880 | $22,080 |
| California | 1.32 | $14,784 | $25,344 |
| New York | 1.42 | $15,904 | $27,264 |
Index 1.00 is the national average. See construction cost by state for metro-level figures and the projects homeowners ask about most.
Frequently asked questions
How much does a glass pool fence cost?
Frameless tempered glass runs $100 to $170 per linear foot installed, and semi-frameless $70 to $120. A 100-foot run with one glass gate lands between roughly $11,000 and $19,000.
Which pool fence is cheapest?
Mesh safety fencing is the cheapest at $20 to $35 per linear foot, followed by aluminum at $30 to $60. Both meet code in most jurisdictions; glass costs three to five times more and is chosen for the view, not for safety.
How tall does a pool fence need to be?
Four feet is the common minimum in the International Residential Code, with no footholds and a self-closing, self-latching gate that opens away from the pool. Some states require five feet, so confirm locally before ordering panels.
Does a glass pool fence need more maintenance than aluminum?
It needs cleaning rather than repair: fingerprints, hard water and sunscreen show on glass, so plan on a monthly wipe-down. Aluminum needs occasional rinsing but hides marks far better.
Does this cost change from state to state?
Yes. Applying each state's construction cost index to the national range of $11,200 to $19,200, the same job runs from about $10,304 to $17,664 in Ohio (index 0.92) to $15,904 to $27,264 in New York (index 1.42).
What is not included in this estimate?
Installed prices including posts, anchors and a self-closing, self-latching gate. Glass prices assume tempered panels and a drilled deck or concrete footing. The figure is a national planning average for the work described above, not a contractor's quote.
